The idea
Each plant takes up a patch of ground set by its spacing. Divide the bed area by that patch and you have the count. Spacing is measured center to center, from the middle of one plant to the middle of the next.
square grid: area ÷ (spacing × spacing)
triangular: area ÷ (spacing × spacing × 0.866)
An example
A 100 sq ft bed with plants 2 feet apart: 100 ÷ 4 = 25 plants in a square grid, or 100 ÷ 3.46 = 29 plants in a triangular pattern.
Square or triangular?
Triangular (staggered rows) fills in more evenly and is common for groundcover and shrub masses. It takes about 15% more plants.
Measuring your bed
You need the area in square feet. Most beds break into simple shapes:
- Rectangle: length × width
- Triangle: base × height ÷ 2
- Circle: 3.14 × radius × radius
- Curved bed: split it into the shapes above, or measure the longest length and the average width
A worked example: an L-shaped bed
One leg is 20 ft × 6 ft (120 sq ft) and the other is 10 ft × 4 ft (40 sq ft), so the bed is 160 sq ft. With plants 18 inches (1.5 ft) apart:
square: 160 ÷ (1.5 × 1.5) = 71.1 → 72 plants
triangular: 160 ÷ (1.5 × 1.5 × 0.866) = 82.1 → 83 plants
Plants along an edge
For a single row, like a border or hedge, divide the length by the spacing and add one. A 30 ft border at 2 ft apart takes 30 ÷ 2 + 1 = 16 plants.
Checking a quote's count
Work out your own count and compare it with the quote. Within about 10% is normal, since contractors adjust for edges and curves. If a quote is far higher or lower, ask what spacing they used.
Skip the math. The free plant calculator takes your bed size and spacing and gives the count, square or triangular, with a slope adjustment.
